Premium 10-Inch Waterproof Coaxial Line Array Speaker System

• Customization: Available
• Activity: Passive
• Speaker Material: Wood
• Model NO.: AEX-ONE
• Model: Aex-One
• Frequency Response Range: 120Hz - 20 kHz (+/-3dB)
• Power: 500W
• Nominal Power of The Coaxial Speaker: 500W
• Nominal Power of The Subwoofer: 500W
• Maximum Spl (1m): 128dB
• Sensitivity: 98dB
• Impedance: 8 Ohms
• Connector: 2 X Nl4 Speakon
• Wood: Plywood
• Hf Driver: 1X3 "Titanium Hf Compression Driver"
• Lf Driver: 1X 10" Long Excursion Ferrite Aluminum F
• Transport Package: 50X40X40cm
• Specification: 24KG
• Origin: China
• Package Size: 50.00cm * 40.00cm * 40.00cm
• Package Gross Weight: 24.000kg

Product Description

Product Description

The core driver unit of this speaker is a 10-inch neodymium ferrite magnetic coaxial speaker. The coaxial design places the high-frequency and low-frequency units on the same axis, which can achieve a more consistent sound distribution and effectively reduce phase distortion caused by the time difference of sound waves. This structure helps minimize echoes and reverberations, making the sound source more concentrated, thereby significantly improving the clarity and positioning of the audio, and making the sound reproduction more accurate.
The cabinet is made of 15-millimeter thick high-quality birch plywood. Birch plywood, due to its high hardness, light weight, and multi-layer structure with uneven density, can effectively reduce the resonant frequency of the cabinet and suppress unnecessary tonal coloring, thereby improving the purity of the sound. The 15-millimeter thickness further optimizes the damping characteristics of the material, making the sound quality more solid and full, and thus is widely used by various audio manufacturers. It should be noted that during daily use, avoid contact with water to prevent the material from getting wet and affecting performance.
Surface treatment: The surface of the cabinet is treated with polyurea waterproof coating. The entire spraying process consists of three steps: first, apply two layers of primer, then cover with one layer of paint. This process gives the paint surface a full and thick texture and achieves an IP66 waterproof level, with excellent resistance to friction.
Hardware protection: A 1.2-millimeter national standard iron mesh is used as the protective cover, and the surface is treated with powder injection technology, making it tough and not prone to deformation. A mesh-like dust-proof fabric is pasted inside the mesh cover, which can better protect the speaker unit. The unique grille design is very sturdy, resistant to dents, and further enhances the durability of the product.

Specification

Frequency range (Hz)	120Hz-20KHz
Dimensions (Wx H x D)	423x309x330mm
Installation	10x M10 mounting points, 35mm bipolar socket
HF	1x3 "Titanium High-Frequency Compression Driver"
LF	1x10-inch long offset ferritic aluminum frame drive unit
Sensitivity	98 dB
Maximum SPL	128 dB
Connection	2xNL4 is speaking
Materials	Plywood
Net weight	21KG

Product picture

NdFeB magnetic coaxial speaker

The 10-inch coaxial speaker achieves a more uniform sound distribution, reducing sound variations. It minimizes echoes and reverberations, concentrates the sound source, and enhances audio clarity. It can better control the direction of the sound and reduce phase distortion.

Surface painting process

Use polyurea waterproof coating. The entire painting process is divided into three steps. Two layers of primer and one layer of topcoat.
It can achieve a waterproof rating of IP66 and is resistant to friction.

High-quality hardware

Use 1.2mm national standard iron mesh. Surface is processed by powder injection technology. It is tough and not prone to deformation. An internal mesh of dust-proof fabric is attached to better protect the speaker. Special design - the unique grille design is very sturdy and resistant to dents.

High-quality birch plywood

In the current audio market, birch plywood is the mainstream material for speakers. Due to its high hardness, light weight, and the multi-layered nature of its uneven density, it can effectively reduce resonance frequencies. Moreover, the 15mm birch plywood material has better damping properties and superior sound quality. It is soft and is adopted by various audio manufacturers. When using and maintaining birch plywood speakers, attention should be paid to moisture and its control.

FAQ

Q: May I buy sample from you?

A: Absolutely! Experience our quality. Sample and freight costs are the buyer's responsibility.

Q: Where is your factory?

A: Our factory is in Jiangmen City, Guangdong Province.

Q: How can we get in touch with you?

A: For more details and latest prices, send an inquiry. I am happy to assist!

Q:How soon do we expect the delivery to be made?

A: Peak season is one month, off-season is also one month.