Premium Wooden Passive Speaker System for Enhanced Sound Quality

• Customization: Available
• Activity: Passive
• Speaker Material: Wood
• Model NO.: AV35
• Model: AV35
• Output Power: 500W
• Power Supply Mode: Other
• Shell Material: Woodiness
• Machine Body Material: Woodiness
• Speaker Configuration: Hf: 1 X 1.75" / Lf: 1 X 15", 3" Voice Coil
• Maximum Spl (1 Meter): 130dB
• Peak Power: 500W
• Impedance: 8 Ohms
• Connector: 2 X Nl4 Speakon
• Wood: Plywood
• Painted Surface: Waterproof Polyurea Coating
• Transport Package: 55.5X52.5X84 Cm
• Specification: 38KG
• Origin: China
• Package Size: 55.50cm * 52.50cm * 84.00cm
• Package Gross Weight: 38.000kg

Product Description

Product Description

The speaker adopts a frequency division drive design to ensure powerful sound output and high-fidelity reproduction. The high-frequency part is equipped with a 1.75-inch titanium diaphragm compression driver. The titanium metal diaphragm has high rigidity and lightweight characteristics, which can provide rapid and accurate transient response, ensuring clear and bright high frequencies with rich details. The low-frequency unit uses a 15-inch ferrite magnetic circuit system, combined with an aluminum frame and a 3-inch large voice coil design. This combination can provide strong magnetic flux density and excellent heat dissipation performance, making the bass deep, powerful and resonant even at high volumes, while maintaining extremely low distortion.
The cabinet is made of 18-millimeter high-quality birch plywood. This material is the mainstream choice in professional audio, due to its high hardness and light weight, which can effectively support the speaker unit. Its multi-layer uneven density structure can significantly reduce the resonant frequency of the cabinet and reduce unnecessary sound coloring. At the same time, birch plywood has good damping properties, which helps to improve the purity of the sound and make the sound quality more gentle and natural. It should be noted that during daily use and maintenance, it is necessary to avoid contact with large amounts of water and humid environments to protect the wooden structure of the cabinet.
The surface treatment of the speaker uses water-based environmentally friendly paint, which meets modern environmental protection requirements. The spraying process is rigorous, including "2 layers of primer + 1 layer of topcoat" three-layer process. The primer can enhance the adhesion between the coating and the cabinet and provide a good anti-corrosion base; the topcoat gives a full and thick visual effect. The final formed coating not only makes the appearance texture more upscale, but also improves the wear resistance and durability of the cabinet.

Specification

Frequency response (-10dB)	55Hz-20KHz
Maximum SPL (peak value)	116dB
Impedance	8 ohms
Power (nominal/program/peak)	500W/1000W/2000W
Net weight	38KG
Connector	2 x Neutrik NL4
Gridiron	Steel barbecue grill, polymer protective net
Sheating material	Plywood
Painted surface	Waterproof polyurea coating
Dimensions (Width x Height x Depth)	450*790 * 480mm

Product picture

Drive the speaker

Using a 1.75" titanium diaphragm ferrite high-frequency driver, a 15" ferrite aluminum frame 3" voice coil low-frequency driver. The sound is very loud and the quality is excellent.

Surface painting process

Use water-based environmentally friendly paint. The entire painting process is divided into three steps. Two layers of primer and one layer of topcoat. This makes the paint on the speaker look fuller and thicker.

High-quality birch plywood

In the current audio market, birch plywood is the mainstream material for speakers. Due to its high hardness and light weight, and the uneven density of multi-layer boards, it can effectively reduce the resonance frequency. Moreover, the 18-millimeter birch plywood material has better damping properties and better sound quality. It is soft and is adopted by various audio manufacturers. The use and maintenance of birch plywood speakers require attention to moisture and water.

FAQ

Q: May I buy sample from you?

A: Absolutely! Experience our quality. Sample and freight costs are the buyer's responsibility.

Q: Where is your factory?

A: Our factory is in Jiangmen City, Guangdong Province.

Q: How can we get in touch with you?

A: For more details and latest prices, send an inquiry. I am happy to assist!

Q:How soon do we expect the delivery to be made?

A: Peak season is one month, off-season is also one month.